Advantage:
Using high quality aluminum alloy control;
High-grade SMD LED;
4 section number5(AA) batteries;
Using environmental illumination recognition technology;
Using human body advanced infrared sensing technology.
Specifications
Influence Mode: Large aperture infrared sensing sensor
Influence control: Built-in light sensor
Sensor distance: >3m
Sensor angle: 120°
LED: SMD3528LED
LED quantity: 12pcs
LED life: >80000h
LED brightness: 1500mcd/pc
Sensor Angle: 120°
Standby Current: 0.35mA
Working Current: 245mA
Power Source: 4pcs LR06"AA"
Shine delay time: 20s
Induction delay time: 5 seconds
Star-up self check: 60seconds
Size: 303*30*29mm
Weight: 107g
Products accessories
A manual;
Two bracket
Decription:
This product is a high-grade human body infrared sensor light, with high quality aluminum alloy control, 4 section number 5(AA) batteries to supply the power; Using high quality LED SMD, make the life longer, using high advanced human body infrared sensing technology, . Let the product has the intelligent control of it come to light when people coming, and keep on light when people is still standing, and light out when people go away. Using light recognition technology, the product identity the environment illuminance by adjusting knob potentiometer, can meet different people's energy requirements.
Procession of Installation
1. Install the batteries
Open the end of the screw shown in the picture with a screwdriver, take off the end, put in the 4 section number 5(AA) batteries in correct direction. Cover end, tighten the screw.
2. Products modification
Dial the switch to "on", means power supply system has open. LED lamp bead light up. And then dial the environment illumination potentiometer of product to "¤ " dial icon position, means product could be can work day and night. The other end "" position mean product can only work in the evening. Wait for 30s( This is the product self-check process. )when the bead burn out after 5-7s. The human body walking through the front end of the products in the normal speed(within 3s) The product will be automatic light, it prove products can work normally.
3. Install bracket
Measure the amount of clamping position, using a drill to open a bottom hope on the cupboard wall with diameter of 1.5mm, Use the M3 tapping screws fixed bracket. Click the bracket on the back of the product to. Adjust the position of the product.
Applications:
The bedroom, study, the bathroom, kitchen, corridor, garret, , wardrobe, ambry, tall cabinet and other many kinds of places.
Relative keyword: Led decorative lighting, led cabinet light, led light fixtures, under cabinet light, cabinet light, led light fixture, indoor lighting, drawer cabinet light, led decorative light, Led Cabinet Lighting, Linear Lighting, Sense Led Closet Light, Led Lights, led lighting.
| Model No. |
ST-IC-Y01-1W |
ST-IC-Y01-2W |
| Power |
1W |
2W |
| Working current |
245mA |
245mA |
| Sensing way |
Infrared body sensing |
| LED Chip |
12pcs SMD3528 Epistar LED chip |
21pcs SMD3528 Epistar LED chip |
| Product size |
303*30*29mm |
505*30*29mm |
| CCT |
2700/4500/6500K |
2700/4500/6500K |
| Shine delay time |
20seconds |
20seconds |
| Power factor |
>0.9 |
>0.9 |
| Sensing distance |
<3m |
<3m |
| Power source |
4pcs "AA" batteries or connect with power supply |
| warranty |
2year |
| Lifespan |
>50000hour |
Audited Supplier 
){kind=link}
){kind=link}